STUDY OF CERAMIC FORMULATIONS FOR ELECTRICAL INSULATORS

  • Víctor Tejada Autor
  • Dominique Plée
DOI: https://doi.org/10.37761/rsqp.v82i1.53
Keywords: Electrical insulators, ceramics, electrical voltage, dielectric strength

Abstract

The Peruvian company Cerartec S.A has developed ceramic-based electrical insulators for medium voltage lines. These products, ANSI 53-2 type (Spool and Guy Strain Insulators), are composed mainly of peruvian raw materials.

Both formulation and process have an influence on residual porosities. Relevant parameters of formulation and process have been identified. In the investigated range, a linear relationship was drawn between porosities and flexural modulus of rupture. The new ceramic electrical insulators have been tested in terms of dielectric resistance, in dry and wet conditions.

Downloads

Download data is not yet available.

Author Biographies

Víctor Tejada, Autor

Cerartec SA, Av. Paso de los Andes N ° 351 Of. 4 - Pueblo Libre - Lima, Peru (cerartec@cerartec.com.pe)

Dominique Plée

Jirón Francisco de Orellana, 206, Groove - Lima, Peru

Published
2016-03-31
Issue
Vol. 82 No. 1 (2016): Journal of Sociedad Química del Perú
Section
Artículos

Copyright (c) 2016 Sociedad Química del Perú

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Revista Arbitrada
Derechos reservados: Prohibido el uso total o parcial del material de esta revista sin indicar la fuente de origen.
Nota: Las referencias comerciales que aparecen en los trabajos no constituyen una recomendación de la
Sociedad Química del Perú